T - 36 TURN IN TURN

DE

• Key-Elemente:

letzte Änderung

NL

• "Key elements":

laatste wijziging

FR

• Eléments clés:

derniére modification

T - 36 TURN IN TURN

• Key elements:
  • distance between first and last kite at "IN" at least 70 %
  • right timing of the start of the loops
  • loops symetrically spread around center window

"IN" is called when all kites are lined up on a horizontal line at ^40. The first loop is started by the last kite at before it reaches <80. The diameter of the loop is about the same as the spacing of the kites at the "IN"-call.
The second loop is started by the fore-last kite, when the last kite has done half of its loop (so is at the lowest point). Each kite starts its loop when the kite behind is at the lowest point of its loop.
"OUT" is called when all kites are lined up again on the 'original' horizontal line at ^40, before >95 is reached.

(For a three person team spacing and diameter of the loops will be about 35%, and the middle loop will be at center window. If a three person team is using very large kites, they can raise the horizontal line by 1 or 2 %. Touching the ground is not requested. For a six person team spacing and diameter will be about 14%)

last changes: june 1, 1997

copyright

Copyright on all diagrams and descriptions is owned by STACK; Sport, Team And Competitive Kiting, and AKA; American Kite Association

Publishing is only allowed (after approval of STACK) under the following conditions:

• with mentioning of the copyright notice (as above)
• without any changes made to the official diagram and/ or description
• and if it is not done for (re-)sale

If you need a diagram/ description to inform competitors, ask STACK for the "paper" version