- distance between first and last kite at "IN" min. 40°
- right timing of the start of the loops.
- loops symetrically spread around center window.
- "IN" call:
when all kites are lined up, first and last kite 40° apart, on a horizontal line at ^25. The first loop is started by the last kite at about <85.
- The diameter of the loops is equal to the spacing of the kites.
The second loop is started by the fore-last kite,
when the last kite has done half of its loop (so is at the lowest point).
So each kite starts its loop
when the kite behind it is at the lowest point of its loop.
- "OUT" call:
when all kites are lined up again on the 'original' horizontal line at ^40, before >95 is reached.
[Eplanation: For a three person team spacing and diameter of the loops
will be about 20°,
and the middle loop will be at center window.
If large kites are used a three person team might raise
the horizontal line 1 or 2°; touching the ground is not requested!
For a six person team spacing and diameter will be about 8°]
last changes: feb. 16, 1999
TT - 36 TURN IN TURN