TI - 39 CIRCLE AND SLIDE
Key Elements:
- equal size of the two loops
- position of first loop, as depicted
- at least 15° of 'sideways' flight, below first loop
Description:
- "IN" call:
at <50^25, while the kite is flying on a horizontal line
- The first loop is made with it's center at <15^15, with a diameter of approximately 20°.
After the loop the kite continues on the same horizontal line, at the end of which a second loop (actually 1 1/2) is flown.
The kite returns to the left on a line that 'touches' both bottom points of the loops.
At about <5^5 the kite is turned in an upright position, but following the same horizontal line (so it flies sideways).
This is done for at least 15°.
- "OUT" call:
at <45^5, after the kite has turned into it's "normal" position and flown another 20° horizontally.
[]
last changes: march 1, 1999
TI - 39 CIRCLE AND SLIDE