FI-10 PIVOTS

Key Elements:

• the four spins done with the center of the kite in fixed position
• horizontal flights along the same, horizontal, straight line
• minimal width of the figure of 80°

Description:

• "IN" call:
  at starting point, with the kite in vertical position, the left wing touching the ground at about <40
• A straight line upwards is flown until about ^18 is reached. Then a 90° c.w. spin is performed. That spin is followed three times by a straight horizontal flight of about 20° and a 90° c.w. spin. The center of the kite should follow a straight, horizontal line during all these moves, as is shown on the diagram. When the kite has reached >40, after it's last spin it is flown downwards.
• "OUT" call:
  when the kite lands at its left tip, at >40

[ ]

last changes: july 16; 1998